If the Romans found one working steam engine would they have been able to copy and use it?

I Previously asked if the Romans could have built a steam engine to power a ship, which received a number of answers perhaps best summarised as “probably not but…”.

Assuming the Romans couldn’t have come up with the idea on their own, suppose that they had discovered a working example of a simple steam engine, what then? (Preserved by a previous civilization or whatever out of scope hand waved reason). Assume they also had simple visual operating instructions.

• Comments are not for extended discussion; this conversation has been moved to chat. – Monica Cellio Nov 24 '17 at 5:17
• The one thing I would say about this is that it totally depends on the individuals who got to examine it as much as it does about the society that those individuals lived in. – Simba Nov 24 '17 at 13:18
• @Simba I absolutely agree, they would need an element of luck. If it fell into the wrong hands someone might just make a little money by scraping it without realising or caring what it was. – Slarty Nov 24 '17 at 14:50
• Yes, they would have been able. Picture that a Greek built a working steam engine and Romans hit upon it during their conquests. Then one of them involved in business may have seen its potential and decide to invest in building such engines in order to replace slave work. He could do it, preferably with help from the Greek who invented it. – Ferred Jan 14 at 7:33

If a civilization finds an example of advanced technology, can they learn to duplicate the technology?

You have two variables:

• The current technological state of the civilization. Call this "A."

• The technological difference between the civilization and the example. Call this "B."

Therefore...

• The earlier "A" is, the more likely the answer is "No."

• The greater "B" is, the more likely the answer is "No." (This is a necessary axiom of Clarkian Magic.)

• As "A" advances, "B" can grow wider and the answer can still be a "Yes."

What is our year point of reference?

The Romans were technological marvels, but most of their advancement was in structural engineering. Had your example technology been anything involving electricity my instant answer would have been "absolutely not."

However, the Roman empire encompassed a large amount of time and a large amount of technological innovation. Just as my grandmother during her lifetime saw the horse-and-buggy and steam ships as the pinnacle of transportation technology give way to walking on the moon and air flight so common people don't dress up for it any more, the Romans shifted from their early years ("absolutely not") to 300ish AD when the answer becomes "possibly, maybe even probably."

An important date is 1 AD. That's when Hero of Alexandria created the Aeolipile. The Aeolipile was, basically, the first steam turbine. At this point they may not have had the other technological know-how to build a fully functioning 1800s steam engine... but they would have played with it for a while and, maybe, would have concluded, "you know, that looks an awful lot like a really complicated Aeolipile."

So far, I'm convinced that Romans from at least, say, 50 A.D. would have understood what they were looking at (after enough examination & experimentation) just as we have the ability to understand string theory without having the slightest idea how to prove it.

That leaves the question, could they duplicate it?

The components of a steam engine are improved with milling, but do not require milling. They can all be cast. The Romans knew how to do this, so they could build the shape of everything they need. That leaves metallurgical strength.

And that's where the last point I can make comes into play.

The Romans knew how to think

The ancient Romans knew how to figure things out. It would take time, because they're basically stuck with empirical research, but they could do it. Now the answer is "Yes, given enough time."

How much time do you need between when they found the engine and when you need them to duplicate the engine?

The following are all gut instinct and open to vociferous argument, but...

If the answer is found in 50 A.D., needed by 300 A.D., I'm willing to go out on a limb and say "Yes."

If the answer is found in 50 A.D., needed by 100 A.D., it's "very unlikely."

If the answer is found in 50 B.C., needed by anything less than 200 A.D., it's "probably no."

If the answer is found before 50 B.C., the answer is "impossible." There's not enough technological understanding in the Roman Empire to be capable of comprehending what they're looking at and by the time the Aeliopile came into being the example would be deteriorated or lost.

Some of the comments are wondering why the Romans would care to pursue steam engine technology. The OP hasn't told us the context of the future technology appearing in the past. If all that appeared was the engine, then it might be a hard sell unless someone was bright enough to think, "what if we hook this sucker up to a cart?" On the other hand, if what appeared was a working car... the Romans would be all over this technology considering the difficulties of their wide-spread empire. The real question is, what if it was a train engine? Something that needed tracks to be valuable? That's a whomping maybe because suddenly the infrastructure investment (laying rail) is enormous.

However, none of that is relevant as the OP didn't ask about it. It's the OP's problem to solve. If he hasn't, it's another question and not a valid answer to this one.

A number of commenters have expressed disbelief that reverse engineering can bring substantial value to the technological innovation process. Their premise is that the technologies didn't develop for a millennia or more on their own, which assumes they couldn't have developed in 200-300 years with a working example to experiment with or to motivate them.

Such commenters have no experience with reverse engineering. I do. Knowing that something is possible and you only need to duplicate it is much, much, much more powerful than not knowing something is possible and waiting around for the combination of imagination and scientific development to merge.

The simple truth is if the Romans were shown with irrefutable proof the value of a working steam engine, they wouldn't have one or two guys out there tinkering around with a vague idea (which is why it took millennia naturally). They'd have thousands and more people dedicated to realizing the military advantage. (Unless as previously indicated you want to choose that they don't see the value, in which case this is all a moot conversation. You won't invent what you don't care about.)

Some people like to think that innovation is somehow a fixed process, that it can't happen any faster than it did, but our own recent history in computer development has proven that wrong time and time again.

You need not understand why something works to duplicate it.

To conclude with an example, I wonder if some believe the specifications of an antique steam engine are as difficult to achieve as a 2017 combustion engine. Obviously, the metals and precision needed for a 2017 engine could not be duplicated by the romans during their time. But that isn't what was asked for. When I once read The Grapes of Wrath I noted a moment in the story when the family had to repair their engine. They'd lost compression, so they wrapped copper wire around the piston, shoved it back into the chamber, and off they went. I wondered about that and so asked my grandmother, who said things like that did, indeed, happen. That's an awful lot of imprecision to still have a working and useful engine.

If you still want to believe the Romans couldn't reverse engineer something as simple as a steam engine (with operating documents!) under the conditions I've specified, by all means, downvote my answer. I won't feel bad.

• Comments are not for extended discussion; this conversation has been moved to chat. – JDługosz Nov 21 '17 at 6:27
• Check these Roman compressed-air ballista from Saalburg Kastell, Germany. I've seen them in person, and read the plaque saying that they performed poorly as the Roman metalworkers did not get the seals as airtight as necessary. So I think the Romans would have "gotten the idea" pretty quickly, but would be hard-pressed to produce an engine with the precision necessary to be effective... – DevSolar Nov 21 '17 at 12:40
• @jamesqf You click on the link 'moved to chat' above and go read them. – robertc Nov 21 '17 at 18:55
• @Luaan, remember too that this is a story. If it is possible then let the story flow. Yes, there 'may have been' real world issues with only having one prototype but there is always 'something' that could have happened. Another strong point to this answer is that knowing something is possible is a TREMENDOUS motivator. – Tracy Cramer Nov 22 '17 at 22:57
• @Cœur, that isn't what the OP asked. Motivating the Romans is the OP's problem because it's a storybuilding issue. All the OP asked is if the Romans could do it. I believe the answer is yes. – JBH Nov 24 '17 at 6:08

What's a "steam engine"? A steam engine is an external combustion engine which uses steam as the working fluid. So we have:

• Newcomen's original atmospheric engine? The Romans (or rather the Greek engineers on which the empire depended) could have copied it, most likely; using it is another question -- it's a very very inefficient engine, which was useful only to pump water out of coal mines, eating lots of locally extracted coal in the process. The Romans did not have coal mines...

• An early separate-condenser Watt engine? Copying it would have been either impossible or very very difficult; using it may have been possible. This type of engine is much more efficient than Newcomen's contraption, but it uses axles and bearings which may or may not be possible to make with late Greco-Roman technology. Anyway, this is the only type of engine which is both useful and not light-years beyond late Greco-Roman technology. At least they could understand what they couldn't make and work to find a solution.

• One of the most perfect mid-19th century Corliss engines, some of which are still operational in the early 21st century? No way could the late Antiquity copy it. They wouldn't even have had the ability to express the dimensions of the pieces accurately enough, much less to make the spherical valves. Not to mention that Corliss engines operate at pressures high enough to blow up any kind of sealed vessels that an artisan could dream of in Roman times.

• A middle-to-late 19th century locomotive engine? I hope they don't even try. Locomotive engines operate under tight space constraints, so that in order to achieve acceptable efficiency "ordinary" locomotive engines worked with pressures starting at 12 atm up to about 20 atm, while "high-pressure" locomotive engines reached about 100 atm.

• A late 19th century nautical triple-expansion engine, as used, for example, on Nansen's Fram? No way unless by magic. The physics and engineering in a late 19th century nautical steam engine are way beyond what was understandable by late Antiquity engineers.

• An early 20th century naval steam turbine engine? Not even with magic.

• @Slarty: The problem with Newcomen's engine is that while it was most likely within the capabilities of the Greco-Roman engineers to copy it, it just does not have any applicability in the classical world. It literally needs a coal mine nearby to provide it with endless amounts of coal; I was not joking when I said that its only application was to pump water out of coal mines. The Romans did not have coal mines, so this kind of engine is just not useful in the Roman world. Since your require a steam engine, the best choice is an early Watt engine; anything later is very unlikely. – AlexP Nov 20 '17 at 19:31
• @sphennings: They had silver mines, and copper mines, and tin mines, and lead mines, and iron mines, and gold mines... But no coal mines. A Newcomen engine is useful only for pumping water out of a coal mine, because, due to its abysmal efficiency, it uses prodigious amounts of coal; it's completely impractical to haul the fuel from any kind of distance. – AlexP Nov 20 '17 at 19:58
• @supercat Not a chance. Lower temperature difference beween hot and cold side means even lower power of the engine, it wouldn't even be able to overcome the friction between it's own parts. – Karl Nov 20 '17 at 22:25
• @supercat: I've never heard of a natural geotermal source of actual steam. "Steam" is a transparent colorless gas, by necessity above 100 degrees Celsius. The white stuff is a mist of droplets of liquid water. – AlexP Nov 20 '17 at 22:25
• "it uses axles and bearings" - You people have no idea how primitive those engines were. Google for "hot box". Even first usable steam locomotives, made about 1830 did not have proper bearings. Engineers of that time just packed a lot of oiled rags and hoped it would be enough(and were right most of the time) – Vashu Nov 20 '17 at 23:00

Not in a way that would bring about the industrial revolution.

Steam engines depended on advances in metallurgy beyond what the Romans had. Specifically steam engines require the consistent production of steel. While the Romans could produce steel it was time intensive and of inconsistent quality. The predictable failure of steel is important when you are constructing pressure vessels to contain high pressure steam.

Technically they could have produced simple steam engines like the Newcomen Atmospheric Engine that operated at a maximum of 2 psi (0.14 bar) with a speed of 12 strokes per minute. This machine was revolutionary at pumping water out of mines but is not the steam engine people think of when they thing of the industrial age.

Having a need for steel of consistent quality would probably lead to improved manufacturing techniques being discovered earlier than they otherwise would be but until those techniques are developed high pressure steam engines would be beyond the reach of the Romans.

• You don't need steel, brass and bronze will work, they just require thicker castings and more fuel because they're heavier and because those alloys dissipate a lot more heat. – Ash Nov 20 '17 at 17:26
• I don't think steam engines require steel. Whilst it might be much safer, convenient and cheaper to use steel, I believe it would be possible to make one out of brass and copper. Which parts do you think require steel specifically? – Slarty Nov 20 '17 at 17:36
• I believe this answer is closer to reality than the top ranking answer at the moment. Realistically, material science plays a big, big role in this situation, and the Romans, for all their fantastic achievements, did not have (enough) good steel. No one at the time did. – AndreiROM Nov 20 '17 at 19:30
• "at a maximum of 2 psi" - most steamships of beginning of eighteenth century used low pressure steam. For example Great Britain and Great Western - 5 psi. The problem with Newcomen was low efficiency. On steamships of beginning of eighteenth century boiler weighted up to 1/4 of the ship. Newcomen engine used up to 5 times more steam than engine with separate condenser. Boiler for Newcomen just would not fit on the ship. But as soon as you know the secret... – Vashu Nov 20 '17 at 20:17
• "While the Romans could produce steel it was time intensive and of inconsistent quality" - so did 1800's Europeans. The very first steam engines used little iron. And later ones used iron, not steel. – Vashu Nov 20 '17 at 23:08

Do not underestimate the technical ability of the Roman...

They would have been able to understand the working principle (fire evaporates water, water vapor moves wheels).

Then they would have tried to copy the design. Not having steel, they would have tried using other metals they had available (copper, bronze, cast iron, etc). With trial and error they would have come to some decent imitation.

As reference, see:

• their impressive building technique, achieved without knowing the concrete as we know it today and by a smart usage of available material
• their ability to develop naval technologies after putting hands on Carthaginians ships (until then they were a land power, after that they started to rule on the sea, too) and putting some smart thinking into it. (credit @ Jeutnarg)
• +1 - you could also improve this by referencing the fact that Rome went from terrible to good at ship-building after finding one mostly-intact, beached Carthaginian ship. They didn't just copy the design, they improved on it and adapted it to their own strengths. Romans knew how to copy and improve. Bonus points if they see military value in the device - for all we know they'd ignore the transportation stuff and create some sort of siege weapon (after their first attempt explodes to dramatic effect) – Jeutnarg Nov 20 '17 at 18:47
• Developing concrete is not the same at all as building a very precisely machined engine which operates under tremendous pressure. Any flaw in the alloy, or the fitting of the parts can lead to catastrophic failure. Pouring concrete for a bridge is not even on the same level, technologically. – AndreiROM Nov 20 '17 at 19:43
• @AndreiROM, Ethiopians have been able to refurbish italian trains and railways abandoned by the italian colonists after WW2. And they didn't have advanced metallurgy either. By the way, building the Pantheon or a bridge across the Rhine is not "just" a plain bridge – L.Dutch Nov 20 '17 at 20:20
• @L.Dutch - if you're telling me that building a bridge across the Rhine was a major achievement for the Romans (considered normal at the time that the steam engine was developed), then how is building a steam engine comparably easy? It requires more effort, not less, and much more precise/advances machining and metallurgy. Also, as far as your Ethiopian example is concerned, those people did not walk out of the jungle, find the trains, and simply refurbish them. They had more help (in the form of modern texts, left behind machinery and tools, etc.) than you're admitting here. – AndreiROM Nov 20 '17 at 20:28
• @AndreiROM You seem dead set on the Romans needing to build a steam engine with the same quality of ours. I think everyone here has agreed it would need to be a lower pressure steam engine that ran way slower and would probably be far more prone to breakdowns. But a P.o.S. steam engine is a steam engine all the same. – Lord Farquaad Nov 21 '17 at 22:18

Necessity is the mother of invention.

Most of the innovation related points have been well covered in other answers. This includes the Aeolipyle. Other mechanical concepts of converting circular motion into linear (screw) also existed.

Could the Romans have copied the steam engine? Yes!

Would the Romans have copied the steam engine? Maybe!

Could/Would the Romans have used the steam engine? NO!

Technology isn't developed because it can be, it is developed because it must be. There are several forces at work here. Someone needs to fund the research and development. Someone needs to invest a lot of money and resources towards the critical initial growth of the technology. There needs to be sufficient scope for returns on investment. If the new technology is disruptive, then there will also be opposition from stakeholders in the existing technology that will be affected. If the new technology is extremely prolific and could affect the balance of political power, then politics will play a part as well.

The OP has not specified a date/period so lets assume the Roman empire is already established. The Romans are spread thin and find it difficult to simultaneously control their entire empire with insurgency issues everywhere. Can the steam engine aid them in consolidating their empire? Or will the emergence of a steam engine ruin existing economy and consequently their grip on the empire? Even worse, the steam engine could well fall in the hands of rebellious entities in the empire and serve as force multiplier, which once again leads to the fall of the Roman empire. In view of potentially counter productive influence of steam engine technology, the Romans may choose not to build it.

In the modern era, we have a similar situation with regards to alternative energy sources. The powerful transportation and energy lobby supporting conventional sources like gas and coal are opposing alternatives. Could we develop energy efficient solar cells, wind turbines, etc? Sure! But are we? Well, kinda, to the extent that it is being allowed to and not more. What will happen to the livelihoods of millions of workers directly and indirectly affected by the gas and coal industry? What will happen to their votes? Will availability of cheap energy alter the balance of geo-political power?

--

An entirely different point is that of technology innovation date. Damascus steel existed centuries ago, but last I checked, we can still not replicate it. This brings to light the point of challenge in fabrication and know-how about the fabrication process. Will it may not apply specifically to steam engine (too simple), it is conceptually possible that humans couple of thousand years from now (working with nano-tubes, micro-robots and quantum computers), may not be able to copy a steam engine! and even if they somehow managed to do so, will not use it for sure!

• Although people often accuse various nefarious "lobby" groups for blocking promising lines of inquiry, the simple reality is the "old" has a large and well developed technology base. The infrastructure for building cars powered by IC engines exists across the entire planet. and there are millions of mechanics to fix cars, gas pumps, the machinery that makes cars etc. There is a very much smaller base for alternatives, and unless they can demonstrate something like 10X the efficiency of the previous technology, the costs of conversion overwhelm any possible savings. – Thucydides Nov 20 '17 at 23:21
• Yes, exactly the point being made. The horse (ox, etc.) drawn carts and the Roman roads did a fine job with the logistical requirements of the Romans. If the freight volume and velocity requirements did not justify investment in steam engines and eventually rail tracks, then why bother with it. The confluence of Maritime industry and colonialism spurred the requirement of steam engines and industrial era in both volume and velocity of freight. Its a case of technology at the right time and right place. – Dynamic Stardust Nov 21 '17 at 1:08
• @DynamicStardust yes all very true. My question unfortunatey was not precise enough. Although this has been very informative in my fictional world I will be able to provide plenty of good reasons why steam power would beuseful – Slarty Nov 22 '17 at 1:21
• Steve Jobs when he introduce the NeXT computer said, "People won't change major systems for a 20% increase in efficiency, or even a 100%, but they will for a 500% increase." This is why the methanol economy is an attractive way forward: It doesn't require a complete refurbishment of our existing infra-structure. Overall I suspect that Egyptions would have more use for a steam engine -- irrigating a wider strip from the Nile, but only if they could find fuel for it. – Sherwood Botsford Nov 28 '17 at 16:33
• @AytAyt Fixed. Really wish comments could have multiple paragraphs. – Sherwood Botsford Nov 28 '17 at 16:34

Knowing that something is possible is a huge headstart

It's extremely common in the modern market for someone to come up with a new exciting product that opens up a whole new field (iPod, iPhone, Ford's Model T, IBM PCs, and so on) to be copied in short order. Competitors will quickly acquire copies of the invention then tweak it to make it their own. This process of copying is so widespread that patents exist to give the inventor a little breathing room to make some money before facing strong competition.

A significant portion of the time spent in the process of invention is finding all the things that don't work. Handing the inventive, industrious and power hungry Romans a working example of a small steam engine that can do real work would light off a firestorm of investment. I trust that they're smart enough to realize that a machine that can do real work without muscle, whip or feed is a huge improvement.

I think most people assume that the Romans would immediately jump straight to the enormous steam engines of mid-1800s Europe involving cast steel parts with highly precise machined faces and surfaces. I disagee. Given that the example they have is small, they will likely build small, low precision examples at first. Due to the imprecision, these machines won't be efficient. They won't have the theory to drive the math to get higher efficiency, at least not to start.

Materials & Precision Limitations

A major limitation they will have is in materials, specifically their metals. While the Romans did work in iron, the ability required to achieve high quality steel at high speed, minimal cost and in large quantity wouldn't happen till the invention of the Bessemer Process in 1855. (High quality was available before Bessemer but not cheaply or quickly. ) The Romans would have to use copper or bronze for their pressure vessels, limiting the pressures achievable. While not ideal, it just means their steam engines won't be as efficient as machines made from steel. Higher pressures might be achievable with thicker pressure vessel walls with the added cost in materials and increased difficulty in manufacture.

They'll need to invent new means of measuring distance and diameter in order to get high precision.

Math

A classic failing of the Roman numeric representation is the difficulty in doing multiplication. Inventing a new numerical system capable of zero and multiplication may be a bit much to ask.

Evolution

Just like in the 1800s, steam engines will start with large static installations. As precision and materials improves, the steam engines can be made lighter and more mobile. Fitting them to ships, who naturally have huge capacity already, will be a natural choice. Smaller engines fitted to carts might be the early tractors.

Not only will this steam engine give them a leg-up on the development of steam power but also screws, bolts and nuts. The invention of these fasteners will go on to revolutionize many other areas of Roman life.

• "the process required to achieve high quality steel ... Bessemer Process in 1855" - by 1855 there were ocean going steamships and powerful locomotives. OBVIOUSLY, the process did not require "high quality steel" – Vashu Nov 20 '17 at 23:02
• @Vashu good point. Corrected in the answer. – Green Nov 20 '17 at 23:08
• "I trust that they're smart enough to realize that a machine that can do real work without muscle, whip or feed is a huge improvement." —— I would not trust that. The Romans failed to even employ the watermill despite its being a free source of energy. A slaved-based economy hampered their innovative ability, and Roman innovation was spurred by the possibility to earn more slaves (which means more capital and more energy in modern-day terms), such as when reverse-engineering Carthagian boats. – idrougge Nov 21 '17 at 10:25
• Without steel, you can't progress from steam-driven ships to steam-driven carts: size constraints on wagons mean you need to work with high-pressure steam. Without precision machining, you can't progress from static installations to ship-borne engines: the low efficiency means ships can't carry enough coal to travel long distances. – Mark Nov 23 '17 at 0:45

Answer is, as most often is the case with "what if" questions, complicated. But in short it can be said: no problem understanding the theory, Replicating the machinery is a different matter.

Simple steam engine was known in 1st Century AD - look up aeolipyle - and Romans had excellent understanding of parts of hydrodynamics - dams, pipes, aqueducts, pumps. So they would have no problems grasping the concept.

But building a working engine requires more than just knowledge. I would say that it's possible to build very simple steam engine using Roman tech, but it would be very heavy and unreliable. As sphennings points out it requires high quality of metal alloy and a degree of precision manufacture not available to Roman tech base. I believe they would quickly found out that and after maybe several decades (on the fast end) to maybe a century at least (on the slow end) to be able to produce stable output.

But the issue is not the tech, but the culture. Romans were uninterested in such things simply because they had enormous excess of power (slavery). Steam engine gained in popularity after it became light and small enough to build locomotive, for example, thus Romans would not have any use for their version. You would have to put this "discovery" in proper context (warship, i.e. ironclad maybe?).

Industrial revolution in England began as a attempt to address the labor shortage that plagued (no pun intended) the Europe since.. well, the plague. Add wars (most notably the 100-years war, 30 Years War and 1000 Years Muslim Invasion) and the labor shortages are a fact of life until end of 19th century. In fact, the wars were mainly why the Europe was so poor for so long, as they sucked away lives needed to improve livelihood across the continent.

What Roman need would a steam engine address? Most of the Roman trade is water-borne. Mediterranean is rather small sea, there is no economic nor political reason to invest huge capital to shorten the travel times by half - it sounds impressive until you realize that it means 3 days from Alexandria to rome instead of 7 or so (admit, I'm guessing here), and there are huge grain ships plying this route already. Sail ships, cheapest possible type. Rome-Londinium route? Again - current tech is enough and speed is not economically explainable.

Raw materials needed to equip Roman legions and address needs of the population are there in sufficient numbers... The only way to improve average roman life is to increase supply of raw materials, but there is no way to do it.

Last thing - for widespread use of steam engine supply of coal is needed. Wood is not good source of fuel.

• I tried to keep the question general to avoid closing down interesting lines of enquiry, but I did have in mind water transport (although this more advanced application should be a separate question). I also have the advantage in my story line to make adjustments so although I said Roman, I can adjust that detail. I will ask some further questions to expand on all this later. – Slarty Nov 20 '17 at 19:11
• Good point regarding a lack of probable interest due to the workforce available. Slavery was indeed a large part of the equation when it came to the Roman economy, and infrastructure. – AndreiROM Nov 20 '17 at 19:45
• Not so much slaves, but water power. I'll do an answer on that subject. – Graham Nov 21 '17 at 10:51
• "7 days from Alexandria to Rome ... (admit, I'm guessing here)" - military vessel with some luck could do it in 6. But typical merchant trip took 20 days from R. to A. and 50 days back(square sail is bad for tacking). At winter, for 4 month there were basically no sailing because of storms. Add problems with loading and it is easy to understand why typical merchant did 1.5 round trips from Rome to Egypt per year. (and towing of barges from Ostia to Rome took a whole day at best) – Vashu Nov 21 '17 at 22:39
• @Vashu - then again, for the size of the required grain imports from North Africa and Egypt to Rome, using your numbers and sources on the above i work out Rome needed about 200 of those huge grain ships (estimated requirements are at about 200k tonnes of grain) or about 3000 of their "standard" trade vessels devoted to carrying just gain. Bit too much, I'd say, assuming that other resources needed to be carried too. 6000 ships in roman merchant fleet? – AcePL Dec 4 '17 at 11:28

As always, there a lot of commenters who have no idea how primitive first steam engines were.

They demand bearings - but even first steam locomotives in 1830's used oiled rags for reducing friction.

They demand steel - steel was not widely used before invention of Bessemer process and by that time there were ocean going steamships and extensive railways.

They demand high pressure steam - but ocean going steamships like Great Eastern used only 5 psi.

Some other points for simplicity I mentioned here.

-

To copy Newcomen age steam engine would be useless - river going steamboats of the beginning 19th century had boiler that weighted up to 1/6-1/4 of displacement, and Newcomen engine would require up to 5 times more steam.

They would be unable to copy second half of 19th century engine - metal piston rings, steam injector, etc.

Ideally Romans would get Newcomen engine with pickle pot condenser. That is almost as efficient as Watts engine, but as simple as steam engine would get(pickle pot doesn't need vacuum pump).

Still, the lack of theory would impede them greatly. For example, they did not know square–cube law so they would not be able to scale their copy well. But I suppose a Roman engineer well above average could do it.

• Well, steam jacks and other types of steam turbines do not, necessarily, require bearings. Obviously their lifetime without them is much shorter, but the issue is what use Romans would have for ANY type of steam engine. Locomotives were useful because they allowed to move a lot of cargo over great distances (admittedly, after heavy initial investment only), but that was a function of growing demand of goods in rapidly growing economy. And what theory you speak of? I understand that steam engine violates laws of 16th century physics and it gave rise to thermodynamics AFTER it's introduction. – AcePL Nov 21 '17 at 11:43
• @AcePL "what use Romans would have" - Romans had pretty impressive industry around mine draining worldbuilding.stackexchange.com/questions/96293/…, and riverboats are quite profitable as well - see their early history – Vashu Nov 21 '17 at 22:11
• @AcePL "what theory you speak of" - actually I talk about lack of theory. Romans didn't know so many stuff that understanding engine for them would be a little harder than we imagine. Heat, heat transfer, latent heat, atmospheric pressure, air dissolved in water, hydraulic shock, etc. – Vashu Nov 21 '17 at 22:13

Most answers speak of the difficulty in making working engines due to the limits of materials technology. What is perhaps more important is the understanding of how the engine is to be used.

Since the Romans would be unlikely to replicate a high efficiency steam engine, what would remain would be a rather low efficiency static engine. This would still be useful for many purposes, and the Romans also understood such mechanisms as the crank and what we would recognize today as clockwork, so being able to tap the power of the engine would not be beyond them either.

The true breakthrough would be to understand that the engine could be used to power more than one device, or to power a device over a prolonged period of time. I recall seeing a show which suggested the Romans used a water powered saw to cut stone at one quarry, with a waterwheel powering a crank which moved a reciprocating bronze saw. The evidence was a bit sketchy, but there was what appeared to be a flue for the waterway, and marks on some stones left in the quarry which could be interpreted as being from very precise and regular saw strokes. A stationary engine would allow any quarry operator to dress stone, not just the ones who happened to be near a flowing stream of water. If the number of slaves lugging wood for the engine were fewer than the number of slaves needs to cut the same amount of stone as a steam engine, then it is a net gain for the quarry owner.

Another place where steam engines would make a huge difference would be textiles. A single steam engine can have its power transmitted to a multitude of looms or spinning machines, needing a far smaller number of slaves to radically increase the output of the Roman textile industry. All Romans could wear high quality cloth clothing, and Roman textiles could follow existing Roman trade routes (the Romans have left evidence of trade in India, for example) to dramatically increase the wealth of the Roman Empire. Massive increases in wealth due to trade would have many secondary and tertiary effects on the Roman economy and even Roman society (for example, the extreme divisions between the landless Plebes and landholder Optimates might have been bridged by a much larger "middle class" of merchants and traders dealing in mechanically produced products, and the skilled tradespeople needed to keep the machinery running.

A factory floors in the age of steam. The Romans could have done this if they had a reliable power source

So even low power and low efficiency steam engines could make a huge difference in the Roman Empire. The real issue isn't in making the engines (it is clear they could do so, since they already had low power atmospheric engines), but rather recognizing the uses they could be put to, and most especially being able to recognize that powered machinery could displace a very large number of slaves yet create even more output (and thus wealth). As a related example, human slavery own Europe seems to have been ended with the introduction of the horse collar. A horse without a collar can pull a light cart with the same efficiency as 10 slaves, but eats as much as 10 slaves. A horse with a collar can pull much heavier carts, but still only eats as much as 10 slaves. Owning horses becomes much more profitable at that point.

You end slavery by making it cheaper to do something without slaves

• Rep for the comment about ending slavery. That was an incredible insight! – JBH Nov 21 '17 at 0:05
• All talk about inefficiency of Roman horse collar comes from single source - Lefebvre des Noëttes. With minor adjustment it is pretty good - "However, in 1972, Spruytte published Ancient Harness Systems which established that there were at least three ancient traction systems shown in art, none of which choked the horses. The shoulder traction (ancient Egyptian) and breast traction (Greek and Roman) artwork had been mis-seen and mis-drawn as a composite that matched neither. This he demonstrated by building reproduction chariots and harness, and running them with suitable teams." – Vashu Nov 21 '17 at 0:41
• The issue at hand is that Romans had very cheap slave labor available. The industrial revolution succeeded not because it could produce cheaper (although that was also a huge point), but first of all in large quantities in uniform quality. England in 18th and 19th century had on average highest wages in the world, and that was actually part reason for Industrial revolution - to substitute insufficient (thus the available becoming expensive) labor force with machine... Europe had labor shortages for much of it's recorded history. – AcePL Nov 21 '17 at 12:26
• The Romans couldn't have duplicated your factory floor. They didn't have the metallurgy needed to produce the interchangeable parts that make large-scale manufacturing possible. – Mark Nov 21 '17 at 23:05
• This is what i was looking for. I work with self proclaimed artisans all day long. The want to do things by hand, the can simply not think of a way to automate tasks for sake of efficiency. But a real world example: Incedible as it sounds nobody made interhangeable parts untill american civil war. Let that sink in for a moment, everything before that was manually fitted in place by a person painstakingly adjusting things. Letting this go produced initially inferior results but massive gains in efficiency. Eficiency is not what most people contemplate on. – joojaa Nov 23 '17 at 6:04

You can build a reliable engine with the alloys that the Romans could produce consistently, Bronze or Brass, and heavy castings but it will be more fuel intensive than is comfortable. The main problem with reproducing the beast will be in the fineness of measurements, getting a tight enough seal tolerance to not just spray steam from every seam. With a lot of patience, unlimited semiskilled labour and nigh limitless money you could hand grind the components to a fine enough fit but the expense would be staggering. That's the version where they have something to go with their steam engine to go off, like an actual blueprint, building a blueprint that was sufficiently detailed given roman era measuring equipment, no, just no.

Honestly I'd expect that your Romans would actually blow up enough boilers trying to get the casting right to give it away as a bad joke, especially if they tried to match the materials, looks like Iron must be Iron... boom, rinse and repeat until they give it up.

• The problem of lack of precision is super-linear in nature. When one part has to fit within 50 parts, and each part couples with an average of 3 other parts, you get 50C3 or 19600 pairwise tolerances. And adjusting one of them can break another tolerance. What more, when things go wrong it can damage the other parts or require a linear or worse search. In effect, your tolerance demands vs capabilities place a relatively hard limit on how complex you can make your device. – Yakk Nov 20 '17 at 19:46
• @Yakk That said, the Romans didn't have interchangeable parts. So while they couldn't machine the parts to required precision in a shop, they would adjust them on the spot (just like it was done with all machines prior to that technique). This of course drives the costs up considerably, but is very much possible. The economic aspect is probably the worst obstacle overall - they'd really have no use for a steam engine in the first place, so why bother with the massive (if even manageable!) expense? – Luaan Nov 22 '17 at 13:34
• @luaan So imagine you have a simple chain of 50 gears in a line. You put them together, and they don't have the right tolerances. So you adjust one of the gears by shaving off or whatever, and now the next one isn't to the right tolerance. You have to basically go from one side to the other, adjusting each gear to match the previous, whenever you adjust any gear. Now make it a network instead of a line; the problem explodes, because adjusting A means B and C and D all need adjustment, but D is connected to E which connects to B. Interchangable parts isn't just a cost reduction. – Yakk Nov 22 '17 at 14:47

The original application of steam engines wasn't for transport or even for industry, it was as pumping engines. Steam engines are uniquely good for pumping. From there, they went into industry, and only a long time later became practical for transport.

Industry did not start with steam engines. The Industrial Revolution was originally powered by water, for textile production amongst other things. This established the need for well-toleranced construction of machinery - bearings, drive belts, gearing, lubrication feeds, and all the features which you would expect in modern machinery. These modern production techniques enabled the construction of progressively better steam engines. The great advantage of steam engines was simply that factories no longer needed to be sited next to rivers with a good head of water - in every other respect they simply picked up the existing water-powered industrial infrastructure. Britain led the Industrial Revolution by being in the fortunate position of having plenty of money for investment (thanks to the slave trade), plenty of sites suitable for water power to start the industrialisation process, and then plenty of coal to power steam engines.

It's interesting to compare the British Industrial Revolution with Roman technology. Romans were profoundly skilled at water transportation, and this was not just used for drinking water but also for heavy industry, and even water organs which required precision construction. Like the British in the 18th century, there was no immediate need for them to move to using steam engines, because their need for industrial power was already being met by water.

They clearly could have developed steam power, because all the technological requirements for the British Industrial Revolution were already there. What they lacked was a strong reason to do it. The Romans started mining in Britain and it continued from then, so by the 18th century miners needed pumps to drain water from ever-deeper mines. Without that need, the Romans would not have carried out the necessary development work to build a steam engine. And without the initial work on pumping applications, the work to turn it into a practical power source for industry would never have started.

They almost certainly could not have worked with high-pressure steam, of course, because that requires higher levels of precision and metallurgy. But then again neither could 18th-century engineers like Newcomen, because all these technologies are mutual enablers and require advances in one to either stimulate or permit advances in another.

Socially, the Romans also lacked a strong reason to move beyond piecework for cloth production and other similar work. Heavy industry like mining clearly benefits from industrial power sources to conveniently move things which are impractical for humans or draught animals. However the British Industrial Revolution was primarily driven by cloth production, and this involved mass-producing something which people were paid to do at home on a piecework basis. If you do not need to pay your workers - if you have a pool of slaves - then the economics of production are quite different. Of course you still need to feed them, so it still makes sense to use as few slaves as possible and make your processes efficient, but you do not have such a strong reason to invest in new technology.

In fact, we know of Hero of Alexandria's steam engine, so we know the Romans knew of the concept. What we also know is that they did not develop it further - and I've tried to give some reasons why that might be. So if they were shown another example of a steam engine, it seems likely that they would similarly say "that's interesting, but what can it do for me?" and keep going with water power and slave labour.

• Another important bit is the cost of raw materials. Part of the huge positive feedback loop of the industrial revolution was the mechanization of mines and farms, which both released laborers to be used for other tasks as well as reducing the price of all those raw materials. There's no point in "mechanizing away" the 10c work of a worker when the materials cost you \$100. And of course, you also need to get the idea that if the cost goes down enough, people are going to buy so much more of your goods that you profit more overall - not exactly intuitive, as history shows. – Luaan Nov 22 '17 at 13:44
• @Luaan True enough. Jewellery is a great example of this. Antique jewellery is extremely thin and flimsy, because with the high cost of gold and the low cost of labour, it made sense to have an apprentice hollow out the inside of everything. Modern jewellery is much more robust because the cost of labour is higher than the cost of gold, so we have chunky jewellery which simply would never have been cost-effective 100 years ago. – Graham Nov 22 '17 at 14:28
• Not exactly relevant to the question but to your answer definitely: there was an article making rounds in UK a while ago, saying that had there been no ban on monasteries the Industrial revolution would came to the UK 2-3 centuries earlier. Which brings me to second point - mechanization of production in British Empire happened due to labor shortage, which was permanent economic state for Europe pretty much always. Britain needed industrialization to address those shortages in the face of exploding demand for goods. – AcePL Jan 25 '18 at 15:03

The Romans had the Ctesibius pump which was a Greek invention. They improved it and gave it vertical stem type check valves. Not only that they had some degree of standardization for their plumbing systems which hints at the beginning of mass production. They had good quality modern looking bronze plug valves and decent lead pipes which were also standardized.

In 97AD Sextus Julius Frontinus the Roman water commissioner wrote De Aquis Urbin Romae which described 15 standardized pipe sizes used throughout the empire. Plumbing found in Pompei suggests a high degree of quality control.

All of leads me to think the Romans were a hairbreadth from developing steam power. A close look at the Ctesibius pump makes me think that if some relatively minor modifications were made and if it were placed on the boiler platform used by Heron to run his aeoliphile they could have had a workable Neucomen Atmospheric Steam Engine.

So what might they use it on? Well perhaps nothing in Rome. But how about Lugdunum (modern day Lyons, France) a bristling prosperous commercial center on the Rhone-Saone River Network? That's where Marquis Claude de Jouffroy tested his Neucomen engine powered steamboat Pyroscaphe in 1783. How would that affect river commerce in the empire?

• Before anyone says this is a question posted as an answer, I'm pretty sure the question at the end is a rhetorical one. – Sydney Sleeper Jul 18 '18 at 1:20
• Perhaps if they had found the aeliopile the industrial revolution ~2000 years early. – Ryan_L Jul 18 '18 at 1:44
• @SydneySleeper I think you're right about it being a rhetorical question. However, it looks like it could be asked as a question in its own right. With some simple revision this could be posted as a question. Please note poster Dan. – a4android Jul 18 '18 at 2:54
• @Ryan_L Not really. A slave economy didn't need steam engines. The early steam engines were very inefficient, extremely expensive & difficult to run. Only by the Industrial Revolution was it possible to make the technical innovations needed to make good working steam engines. The aeliopile was really only a toy. – a4android Jul 18 '18 at 2:57

Problem in copying any XVIII+ technology is not in understanding the principles of the working; Romans and Magna Graecia "Philosophers" would understand it quite readily.

Problem would be the required materials, which were simply unavailable at the time.

Medieval Alchemists, while searching (in vain) for "Philosophical Stone", accumulated a enormous amount of knowledge about metallurgical processes which were used in the following ages.

No way earlier smiths could have produced steel and other materials of sufficient quality to be used in efficient steam engines.

• No doubt early attempts would have produced poor results but trial an error would probably have produced a working machine. You don't need steel to build a steam engine (although it makes it a lot safer and more efficient if you do). – Slarty Nov 20 '17 at 21:40
• @Slarty: I'm not convinced. You can learn anything by trial-and-error, but these specifics took a few centuries of trial-and-error. Having a working example wouldn't have helped much since many materials were simply not available at the time, including (but not limited to): gaskets, brushes, casehardened steel (for ball bearings), flawless steel (for chambers and pistons), etc, etc. If they tried with available materials they would end up with busted cylinders and/or bearings lasting a few hours... and no way to know how to produce better materials. – ZioByte Nov 20 '17 at 22:28
• @ZioByte sure, they don't have a bunch of modern innovations that would make a more resilient machine. However, i assume that they would find operating pressures and materials that would work within the materials limitations they operated under. – Green Nov 20 '17 at 23:13
• @ZioByte Well I checked gaskets and found this: Before 1840, many gaskets were made from pieces of rope called Oakum. After the rope was picked apart, workers tarred, hammered, and caulked it into seams of boat hulls, or lubricated and packed it into the edges of steam pistons in Newcomen style engines and held in place with weights. During this time, leather gaskets were used for water pumps, even though the leather gradually tore apart when it came into contact with steam. temelgaskets.com/the-history-of-gaskets – Slarty Nov 20 '17 at 23:26
• @ZioByte But no way could Newcomen have done it either. When he built his first beam engines, the metallurgy and tolerances for high-pressure steam were completely out of reach of engineers. It took decades for this to become available. And yet Newcomen did build a good-enough steam engine, and the design went through iterative improvements for the next 200 years until it was finally replaced by electricity for static applications and the internal combustion engine for transport. – Graham Nov 22 '17 at 14:33

My answer will attemt to summerise the responses todate as I see them

The problems suggested

The Romans didn’t have the machining skills such as milling
Whilst undoubtably a handicap it is not clear exacly which part of a steam engine woud need milling as an absolute requirement.

The Romans didn’t have the knowledge base
No scientists, tools, techniques and support system engineers. Or the wrong social and economic climate. But they did have engineers, experienced metal workers, architects and thinkers and a basic steam engine is not that complex. This is a fair point but the severity of the issue is debatable, especially if time is allowed for development.

The Romans didn’t have the metallurgy particularly no good quality steel
The need for steel is demonstrably false, bronze and copper will do fine although thicker castings and more fuel will be needed as these are less efficient and dissipate heat more. While the Romans could produce steel it was time intensive and of inconsistent quality – similar to 1800's Europeans. The very first steam engines used little iron. And later ones used iron not steel. Although steel was eventualy used.

The Romans couldn’t cast cylindrical pistons
Demonstrably false, the Romans had wonderful bronze pumps with a precision fit of 0.1 mm, more than an order of magnitude better than the precision that was used by to steam builders in the beginning of eighteenth century, though steam engine cylinders were several times bigger. Engineering in the Ancient world, J.G. Landels, 1978, page 83– Vashu

The Romans were not able to make axles and bearings
(so they could not have made a steam engine) Demonstrably false. The first steam locos did not have proper bearings just oiled rags. So they are not an essential ingredient https://en.wikipedia.org/wiki/Hot_box

Historically the steam engine took thousands of years to develop…
The fact that the steam engine took a millennia to develop in our time line makes the assumption that the Romans did not have a working model of a steam engine. So is not a good argument as this is a false assumption in this scenario.

The Romans didn’t need steam engines because they had slaves
(wind mills, donkeys and sails etc) There is merit in this argument, although it is not decisive. The existing technology merely gives the steam engine a smaller advantage; they do not remove the advantage. Entrepreneurs would also be needed as well as inventors and engineers.

Roman steam engines would have been lower pressure and prone to breakdown
True but not a show stopper en.wikipedia.org/wiki/SS_Great_Britain Pressure required just 5 psi

Steam engines require a lot of fuel probably coal – no coal near Rome – so they would have no fuel Wood was readily available in Roman times.

The scope for disaster or mishap would have been great
The steam engine might blow up if mishandled, or it might be damaged during disassembly or get lost or hidden by someone before it was noticed and there is only one example of it. Fair points, although again not show stoppers. The story would have to ensure it fell into the right hands with a little luck.

The Romans could not make pipes except out of lead
Open question, I’m not sure about this and can find no definitive proof. But I suspect that it should not have been beyond Roman capability either by rolling a flat sheet of copper around a solid rod and sealing it with lead (or heat) or by direct casting of short lengths of pipe, especially considering the relatively low pressure requirements.

The positives

• By the 3rd century the Romans had access to all the key elements of a steam engine. https://en.wikipedia.org/wiki/Roman_technology#Technologies_developed_or_invented_by_the_Romans
• Reverse engineering brings substantial value to technical innovation process.
• Knowing that something is possible and trying to duplicate it is much more powerful than waiting for imagination to generate it.
• You don’t need to understand how it works to duplicate it.
• Working engines don’t have to be anywhere near perfect
• Given years, decades or a century or two initial insights could have been built upon

OP Opinion
If the Romans had discovered a fully working example of a steam engine and it had fallen into the right hands they may have been able to copy it (or a modified version of it using some different materials). With sufficient time to develop it they should have been able to produce examples of practical working steam engines.

It is less clear how long it would have taken for this new technology to become really useful. The disadvantages would have been the constant need for fuel, the relatively low pressure and power, unreliability and the availability of less efficient but plentiful alternatives such as slave labour, beasts of burden, sails, wind and water power.

Usefulness of this question
For my story the Roman steam engine is a good fit. It certainly should suspend disbelief and is verging on credible as described. To make the situation even more believable additional changes could be introduced based on the responses to this question (and beyond its scope). Such as: more than one example being found, specific additional technologies being found, higher costs to slave labour and a greater need for the power.

Many have pointed to several points that need to be clarified (appologies)

Clarifications needed
What sort of steam engine! (Clarified in comments later)
We are talking 1700's. Hopefully a primitive version of Watt’s steam engine or perhaps a Newcomen engine with a pickle boiler. But other options considered.

Unspecified and outstanding
What Roman time period?
What is the context of the steam engine?
Was it a static pump, locomotive engine with wheels, ship with engine or a demonstration model with flywheel that was found?
Who discovered it and how?

• If you roll copper around a rod and seal the seam with lead, you get a pipe that can hold water. It won't hold steam, though -- the best you can hope for is a slow leak along the seam; the worst is an explosion killing anyone nearby. – Mark Nov 23 '17 at 1:17
• @Mark, fair enough - so it's down to cast copper pipes then... – Slarty Nov 23 '17 at 1:23
• The woods of Italy were being depleted since metallurgy was first developed. If the Romans were to power steam engines on an industrial basis using coal made from wood, they would be facing an ecological breakdown even sooner due to erosion. – idrougge Nov 24 '17 at 12:09
• Obviously then the engine doesn't end up in Rome, it ends up somewhere further out in the Empire in the hands of an enterprising local leader who doesn't have ready access to the masses of slaves available in Rome. – Keith Morrison Nov 28 '17 at 20:31

Assuming that a Roman steam engine had to be invented in resource poor Rome is like assuming the Wright Brothers had to invent the airplane in Washington DC. I mentioned Lugdunum (Lyon, France) as a likely place for a steam engine development. Not only was it a thriving commercial center but it had ample resources. Coal and Iron deposits were nearby as well as copper, lead and zinc from the Chessey mining area approximately 15 miles northwest of the city. As far as exploding boilers that only became a problem when engineers started going to high (50 psi) pressure steam engines. The Clermont and other steam driven ships of the time did quite well with much lower pressure boilers deriving most of their power from the force of vacuum condensation. You may get scalding from a steam leak but these things weren't going to blow up.