Ok, this is kind of two questions in one

  1. In a scifi setting where laser or plasma are the main weapons, what sort of system would be used to protect from the heat and radiation?

  2. My idea was a heat proof body suit that used a force field to absorb the radiation. Would this actually work or would armor be required?

  • $\begingroup$ If you use a force field we need a little more information, as they aren't real. As force fields qre fictional, they can range from "impervious to everything" to "can only block UV light from the sun for 10 seconds". $\endgroup$ – Trioxidane Dec 24 '20 at 21:01
  • $\begingroup$ Plasma "guns", as detailed in many (and recent) questions on this site, are also not real/practical. $\endgroup$ – jdunlop Dec 24 '20 at 22:00
  • $\begingroup$ You need to specify if your talking space (vacuum) or surface combat. There are options in one that won't necessarily apply in the other. $\endgroup$ – Mon Feb 3 at 4:42
  • $\begingroup$ Electrically and thermally Superconductive suit.. Accept the incoming hit, and dissipate the energy over a very wide area, rendering it harmless. $\endgroup$ – PcMan Feb 4 at 5:31

My suggestion is actually quite simple, actively cooled armor.

Lasers in particular do damage by dumping heat energy into the target, so by dissipating that energy you prevent the laser from burning through your body.

Of course this system works much better for vehicles as most cooling systems built might not exactly be man portable considering you need radiators, piping, and turbopumps along with coolant tanks.

A starship with actively cooled armor could spin along its axis to make it impossible for a beam to focus while dumping the incoming laser heat into a heat sink. This could allow them to run the gauntlet and get into close range to blow up a laser armed warship.

However a soldier could use a system like this to also act as a portable air conditioner to keep them comfortable in all climates or even better make the fluid a non newtonian shear thickening fluid so it can act as armor against projectiles too.

Another thing that could be done is simply to plate your soldiers in hypothetical thermal superconducting material on the outside of their armor to dissipate the heat as well.


Mirrored bodysuit



Lasers will bounce right off you in your sweet mirrored body suit! You are now the living disco ball that you become in your dreams. You will dance forward boldly, rays bouncing off you in all directions. Cue the strings!

Liam, wait! You need to put the pants on too! There are pants that come with this... Liam?

Well, he'll figure it out.

  • $\begingroup$ Not simply mirrors, but retroreflectors to reflect the beam back to its source, thus destroying the attacker! $\endgroup$ – Petr Dec 25 '20 at 10:14
  • 1
    $\begingroup$ Not so colorful, though, or they will hit you with green lasers. $\endgroup$ – Mary Feb 3 at 4:45
  • $\begingroup$ @Mary: There could be a mulitlateral accord agreeing that the use of green lasers is a war crime. $\endgroup$ – Willk Feb 3 at 15:46
  • $\begingroup$ But you don't want to have to suit out your soldiers again when they go up against a war criminal. $\endgroup$ – Mary Feb 4 at 0:19

E.E Doc Smith's Lensmen in the 1930s required both.

Which was used depended upon the circumstances and the weapon.

  • Neutralizing screens were very effective at stopping beams, but personal shields couldn't absorb the kinetic energy of a bullet fast enough to render it completely harmless.
  • Armor could absorb heavy impacts from large-caliber machine-rifles, but were rapidly ablated by beams.

Obviously a smart Lensman used both together, maximizing their protection in a fight...

Utterly careless of the service-life of the pitifully weak Delgonian projectors, [the Lensmen] were using them at maximum drain and at extreme aperture--and in the resultant beams the Delgonian soldier-slaves fell in scorched and smoking heaps. On came reserves, platoon after platoon, only and continuously to meet the same fate; for as soon as one projector weakened the invincibly armored man would toss it aside and pick up another. But finally the last commandeered weapon was exhausted and the beleaguered pair brought their own DeLameters--the most powerful portable weapons known to the military scientists of the Galactic Patrol--into play.

And what a difference! In those beams the attacking reptiles did not smoke or burn. They simply vanished in a blaze of flaming light, as did also the nearby walls and a good share of the building beyond!

Source: Galactic Patrol, 1938


Two suggestions: Ablative armor and Reflective armor.

In the real world, lasers (and other forms of focused light, such as burning mirrors) cause the object they are focused on to heat up rapidly. This is because light is a form of energy, and lasers are a type of light. When light hits an object, it either bounces off of the object or is absorbed by the object. When an object absorbs light, that energy is converted into heat.

In order to survive atmospheric reentry, spacecraft use ablative materials. These are materials that sublime (turn from solid into gas when they heat up, like dry ice) and are torn away by air resistance. This way, the parts of the vehicle that heat up are removed so that the passengers inside the spacecraft don't heat up too much.

It is possible to create ablative armor for defense against lasers, so that the armor turns into vapor when the laser hits it, preventing the wearer from getting injured. This is similar to how ceramic body armor protects against bullets: The ceramic plates break so that the armor is damaged instead of the wearer.

Reflective surfaces have a high albedo, or amount of light reflected. The more light that a surface reflects, the less light that surface absorbs. A dark surface will heat up faster than a light surface because it absorbs more of the light. A surface with a very high albedo, such as a mirror, will absorb little light and therefore not heat up much at all.

This means that if the outer layer of your armor is made a mirror, most of the laser will reflect off of it, causing a significant reduction in how much damage the wearer takes.

Both ablative and reflective armors can be made into armored suits for personal use, handheld shields, or scaled up to cover vehicles or buildings.

  • 2
    $\begingroup$ May i suggest adding the option of "absorptive" armor? Accept the incoming beam's energy, but very rapidly dissipate it throughout the whole armor, thus preventing a local burnthrough? This is, after all, what current tech Kevlar armor does. It does not deflect or bounce off the projectiles energy, but spreads it widely enough to be harmless. $\endgroup$ – PcMan Dec 25 '20 at 10:10

In space:

    1. Magnetic shielding might deflect plasma based weapons depending on whether on not it carried a charge.
    1. Ablative armor (as mentioned previously) combined with
    1. Heats sinks and active cryogenic hull cooling (also previously mentioned)
    1. Simple rotation along one access so that a beam striking the ship hits different spots on the hull as the ship rotates past the point of impact.
  1. At longer ranges in space Active Avoidance (dodging out of the way). The enemy is hampered by the time lag between firing and observing a hit or miss. Obviously this diminishes in effectiveness as the range closes.

***Reflexive surfaces not so much because its very hard to find a material that will reflect a board range of frequencies while your enemy can simply pick one your 'mirror shield' is not good at reflecting)

On the Ground

  1. Ablative amour
  2. Chaff smoke/pods designed to absorb/relect laser light and obscure the target.
  3. Pulsed EMP/plasma disruption. Incoming plasma streams might potentially be disrupted deflected by an outgoing 'explosive' release of plasma in the opposite direction. Think of the active defense systems on tanks (there are several types you can look up). Basically an incoming missile etc is detected by special sensors and just before impact an explosive charge like a giant shot gun round is fired at it destroying it just before impact. Work has also been done on using bursts of plasma to disrupt HEAT rounds when they impact.

In this case a plasma weapon hit would instantly activate a circuit that triggered/detonated an opposing/outgoing pulse of plasma, hopefully neutralizing the incoming hit.

One problem - since these devices are attached on top of the targets armor facing outwards they are a ONE SHOT defense. Another strike on exactly same spot would hit the armor. Hit another spot and if that has a EMP plate on it no problem. But you probably cant stack them on top of one another like pineapple rings in a can.

  1. EMP hardening of onboard systems/circuits so that random electromagnetic effects generated by plasma weapon hits do not cause supplementary damage by burning out electrical systems as per a nuclear EMP weapon or similar.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.