# How to define operational altitude on other planets?

Since different planets have different gravity, atmospheric pressure, air density and composition, it's obvious that a definition of operational altitude based on earth sea level is inadequate for a hypothetical aircraft that can be deployed on different worlds. Leaving aside the question of how such an aircraft could be designed, I'm interested to know if there might be some way to define an absolute operational altitude, perhaps by specifying at which atmospheric pressure the number holds true and allowing one to adjust the figure by doing some simple math depending on the condition of the planet in question.

• Have done any research on the topic? – L.Dutch - Reinstate Monica Apr 17 '19 at 12:29
• I tried googling the question in various forms but I can't find anything. – Inquisitive Geek Apr 17 '19 at 12:31
• I think it depends on what you're using that operational altitude for. Can you please clarify why you think this is relevant to your aircraft? Are you just concerned with not crashing into the ground? Do you want it to govern your lift calculations for atmospheric density? It really depends on your goal. – Mathaddict Apr 17 '19 at 23:21
• I was thinking along the lines of some sort of technical specs that could give an idea of the kind of atmospheric conditions that this hypothetical aircraft could handle, without going into long and convoluted details for each and every aspect of the atmosphere that a planet could have. This being for fiction, I think the ideal would be some sort of simple value that could be maybe be used in conjunction with some kind of table, so that a layman could get an idea of the aircraft's capabilities without needing a backgrounder in engineering or aeronautics. – Inquisitive Geek Apr 18 '19 at 9:34

(Do you need it to be strictly an absolute operational altitude?)

The easiest approach (no pun intended) might be to go with something similar to what airliners on Earth do. While for the passengers it will be translated to "we're cruising today at 36,000 feet", that's a simplification.

What airliners do is that they cruise at a particular ambient (static) air pressure level, or maintain a static isobar.

Wikipedia offers a decent illustration:

When the pilots on a commercial flight tell the passengers "we're cruising at 36,000 feet", what they really mean is "we're cruising at Flight Level 360". When the altimeter is set to consider an air pressure of 1013.25 hPa as "0 ft", known as a standard setting (because 1013.25 hPa is the surface air pressure in the International Standard Atmosphere), this shows on their instruments as 36,000 feet.

An isobar is, basically, a line of identical (static) air pressure.

This is all useful because it means that pilots don't need to concern themselves with the ground below them, as long as they are well clear of it (for which they have charts and maps and ground proximity warning systems and all kinds of fancy gadgets; on some flights, it's even possible to use a pair of good old Mark I eyeballs), and Air Traffic Control can simply instruct the pilots to maintain a particular flight level. As long as everyone has their altimeters set correctly, everyone on "flight level 360" will be flying on the same isobar, regardless of how that isobar relates to the ground below them. Only near the ground (below the transition level) do pilots switch their altimeters to the current local air pressure setting, at which point they are flying at a particular altitude measured not as static air pressure, but one measured by way of static air pressure in feet or, rarely in the case of aviation, meters.

Aircraft and low-orbiting spacecraft both need to concern themselves with ambient air pressure; aircraft primarily for lift, spacecraft primarily for drag. Since the flight level is essentially a way of specifying an ambient air pressure, this provides pilots of both with a crucial piece of information packed into a convenient, bite-sized chunk.

Now, you can define things like operational envelopes in terms of what static (or dynamic, which is static plus e.g. accounting for the effect of relative movement) air pressure range is required to maintain flight (or freefall), and translate this directly into your corresponding concept of "levels".

And you don't even need to define them in terms of absolute altitudes, let alone height, unless you really want to. If you want to do that, then you can apply whatever pressure gradient you have in your atmosphere to your concept of levels and end up with a measurement in your preferred unit of length or distance.

You have to consider the reasons why an aircraft has an operational altitude range. Primarily that's related to the air pressure and the type of engine and wing size on the aircraft.

Hence you're on the right path by looking at the atmospheric pressure range and extrapolating from that to get appropriate altitude ranges for any given planet. The median altitude and the available range of altitude will change based on local conditions, gravity, atmospheric density etc.

All you need to do next is define the datum you're calculating from for navigation purposes as not every planet will have something equivalent to "sea level" to work from.

Air pressure might be a good idea as it helps to give you an idea of efficiency and drag.

But you would need to correct it for the local gravity as higher differences would mean a different gradient.

And of course things like safety margins would still be in the original distances.

So you would have some sort of lookup table to recalculate your heights, and if you would need to recalculate.

You won't have a "one size fits all" solution. All will depend on the planet.

In general you want to define an arbitrary reference level which can be easily used to determine the height.

If the planet has an atmosphere, you can use, for example:

• The quota at which the stellar constant (amount of light power per unit surface) has dropped by a given factor with respect to outer space at same distance from the star
• The quota at which the atmospheric pressure is at a given value (i.e. 1 bar)

If the planet has no atmosphere, you cannot use any of the above.

Moreover, all of the above are not really constant, so they might be hard to be used as real references. Atmospheric pressure changes with meteorological conditions, atmosphere opacity is affected by many factors...

Therefore you might want to use, as reference, some orbital parameter which depends only on the mass of the planet, like the planet-stationary orbit. That being your 0, you can refer heights to that level.

As added bonus, you can set this up without having to explore the planet and probe its atmosphere, so it is pretty convenient if you start from scratch.

• If the planet has no atmosphere you can't use an aircraft, so the point is moot ;) – Separatrix Apr 17 '19 at 12:47
• @Separatrix, I am already looking forward to broader standards. Mercury airlines have their rights, too ;) – L.Dutch - Reinstate Monica Apr 17 '19 at 12:48